Rotary Molding Products Before rotomoulding manufacturing technology, you need to prepare some excellent quality molds, and then put it on the workbench that runs the rotomoulding machine. The processing rotomoulding product machine is usually equipped with a heating chamber and a jib. Some also have cooling equipment such as water atomizing or cooling fans. After settled, first place a few molds on the machine. Along with this, plastic resin powder was disposed in all the molds, followed by heating while rotating from different viewpoints in the longitudinal and transverse directions.

The ablated resin binds the hot mold and the surface layer uniformly and closely. Wait until after a certain period of time, the need to end heating can be rotated to the mold temperature, so that the mold continues to rotate inside until its thickness is the same anywhere. After the mold temperature can be released, the mold is opened, the product is removed from the mold cavity, and a new resin is then added to start the next rotation. Throughout the manufacturing process, the speed of the mold transition, heating, and cooling all occur through harsh and accurate manipulation.